 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TN2504 Low Threshold N-Channel Enhancement-Mode Vertical DMOS FETs Ordering Information BVDSS / BVDGS 40V RDS(ON) (max) 1.0 VGS(th) (max) 1.6V ID(ON) (min) 4.0A Order Number / Package TO-243AA* TN2504N8 Die TN2504ND *Same as SOT-89. Product supplied on 2000 piece carrier tape reels. MIL visual screening available. Product marking for TO-243AA: Features Low threshold -- 1.6V max. High input impedance Low input capacitance -- 125pF max. Fast switching speeds Low on resistance Free from secondary breakdown Low input and output leakage Complementary N- and P-channel devices TN5L Where = 2-week alpha date code Low Threshold DMOS Technology These low threshold enhancement-mode (normally-off) transistors utilize a vertical DMOS structure and Supertex's well-proven silicon-gate manufacturing process. This combination produces devices with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, these devices are free from thermal runaway and thermally-induced secondary breakdown. Supertex's vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where very low threshold voltage, high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. Applications Logic level interfaces - ideal for TTL and CMOS Solid state relays Battery operated systems Photo voltaic drives Analog switches General purpose line drivers Telecom switches Package Option D G D S Absolute Maximum Ratings Drain-to-Source Voltage Drain-to-Gate Voltage Gate-to-Source Voltage Operating and Storage Temperature Soldering Temperature* * Distance of 1.6 mm from case for 10 seconds. 11/12/01 BVDSS BVDGS 20V -55C to +150C 300C TO-243AA (SOT-89) Note: See Package Outline section for dimensions. Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website. 1 TN2504 Thermal Characteristics Package TO-243AA * ID (continuous)* 0.89A ID (pulsed) 4.5A Power Dissipation @ TA = 25C 1.6W jc ja IDR* 0.89A IDRM 4.5A C/W 15 C/W 78 Mounted on FR5 board, 25mm x 25mm x 1.57mm. Significant P increase possible on ceramic substrate. D ID (continuous) is limited by max rated Tj. Electrical Characteristics (@ 25C unless otherwise specified) Symbol BVDSS VGS(th) VGS(th) IGSS IDSS Parameter Drain-to-Source Breakdown Voltage Gate Threshold Voltage Change in VGS(th) with Temperature Gate Body Leakage Zero Gate Voltage Drain Current Min 40 0.6 -3.8 1.6 -4.5 100 10 1 ID(ON) RDS(ON) RDS(ON) GFS CISS COSS CRSS td(ON) tr td(OFF) tf VSD trr ON-State Drain Current 1.0 4.0 Static Drain-to-Source ON-State Resistance Change in RDS(ON) with Temperature Forward Transconductance Input Capacitance Common Source Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage Drop Reverse Recovery Time 1.2 300 0.5 0.7 70 50 20 125 70 25 10 10 25 13 1.8 V ns VGS = 0V, ISD = 1.5A VGS = 0V, ISD = 1A ns VDD = 20V, ID = 500mA, RGEN = 25 pF 1.7 4.5 1.25 0.8 1.5 1.0 0.75 %/C Typ Max Unit V V mV/C nA A mA A Conditions VGS = 0V, ID = 2mA VGS = VDS, ID= 1mA VGS = VDS, ID= 1mA VGS = 20V, VDS = 0V VGS = 0V, VDS = Max Rating VGS = 0V, VDS = 0.8 Max Rating TA = 125C VGS = 5V, VDS = 15V VGS = 10V, VDS = 15V VGS = 5V, ID = 300mA VGS = 10V, ID = 1.5A VGS = 10V, ID = 1.5A VDS = 15V, ID = 2.0A VGS = 0V, VDS = 20V f = 1 MHz Notes: 1. All D.C. parameters 100% tested at 25C unless otherwise stated. (Pulse test: 300s pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. Switching Waveforms and Test Circuit 10V 90% INPUT 0V PULSE GENERATOR Rgen 10% t(ON) t(OFF) tr td(OFF) tF td(ON) VDD 10% 10% INPUT OUTPUT 0V 90% 90% 2 VDD RL OUTPUT D.U.T. TN2504 Typical Performance Curves 5 4 Output Characteristics VGS = 10V 8V 6V 4V 3V 0 10 5 4 Saturation Characteristics VGS = 10V 8V 6V 4V 3V 0 2 ID (amperes) 2 1 0 ID (amperes) 50 3 3 2 1 0 VDS (volts) 20 30 40 VDS (volts) 4 6 8 10 2.0 Transconductance vs. Drain Current VDS = 15V 2.0 Power Dissipation vs. Ambient Temperature GFS (siemens) PD (watts) 1.0 TA = -55C 25C 125C 0 1 2 3 4 5 1.0 TO-243AA 0 0 ID (amperes) 0 25 50 TC (C) 75 100 125 150 10.0 Maximum Rated Safe Operating Area Thermal Response Characteristics 1.0 Thermal Resistance (normalized) TO-243AA (pulsed) TA = 25C 0.8 0.6 0.4 0.2 0 0.001 ID (amperes) 1.0 0.1 TO-243AA (DC) TO-243AA PD = 0.55W TC = 25C 0.01 0 1 VDS (volts) 10 100 0.01 tP (seconds) 0.1 1 10 3 TN2504 Typical Performance Curves BVDSS Variation with Temperature 2.0 1.1 On-Resistance vs. Drain Current VGS = 5V BVDSS (normalized) RDS(ON) (ohms) VGS = 10V 1.0 1.0 0.9 0 -50 0 50 100 150 0 1 2 3 4 5 Tj (C) Transfer Characteristics 10 1.4 8 ID (amperes) V(th) and RDS Variation with Temperature 1.6 VDS = 15V VGS(th) (normalized) 1.2 RDS @ 10V, 1.5A V(th) @ 1mA 1.4 6 TA = -55C 25C 1.2 1.0 1.0 0.8 0.8 4 2 125C 0 0 2 4 6 8 10 0.6 0.6 -50 0 50 100 150 VGS (volts) Capacitance vs. Drain-to-Source Voltage 100 10 Tj (C) Gate Drive Dynamic Characteristics f = 1MHz 8 75 VDS = 10V 130 pF CISS VGS (volts) 6 C (picofarads) 50 COSS 25 4 VDS = 40V 2 CRSS 0 0 10 20 30 40 0 0 60 pF 0.4 0.8 1.2 1.6 2.0 VDS (volts) QG (nanocoulombs) 11/12/01 (c)2001 Supertex Inc. All rights reserved. Unauthorized use or reproduction prohibited. 4 1235 Bordeaux Drive, Sunnyvale, CA 94089 TEL: (408) 744-0100 * FAX: (408) 222-4895 www.supertex.com RDS(ON) (normalized) ID (amperes) |
Price & Availability of TN2504
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |